Short answer
How does supply to power plants actually work?
Two things define it: sites are scattered and remote (one operator may run several plants in different provinces) and demand is dominated by site consumables and PPE. The workable setup is a single order covering all plants, distributed shipment with a separate delivery note per location, and one invoice issued to head office (within 7 days of delivery, Tax Procedure Law art. 231/5; deliveries spread over a longer period are invoiced per delivery group).
Plant sites sit far from city centres; even the smallest consumable takes supply planning. In shift-based facilities there is no “we’ll buy it tomorrow” — planned maintenance windows can’t be missed and safety equipment can’t run short.
AKSCO works in line with these realities: requests are quoted against technical specifications, product documents (declaration of conformity, safety data sheet) are sent on request once confirmed with the distributor, and deliveries are planned to site. For periodic needs — PPE renewal, filter changes, chemical replenishment — we set up a scheduled supply routine. This explanation is not a contractual commitment.
Sample request list for this industry
A plant-site list hangs on three jobs: the maintenance outage, site HSE and admin-building replenishment. The groups below follow those three; if your list looks different, send it as it is and we will group the lines.
- Outage consumables: filters, gaskets, bearings, belts — Lines tied to a planned maintenance window; the equipment make and model or the part code is enough.
- Oils, greases and maintenance chemicals — For bearing and joint lubrication; the safety data sheet is obtained from the distributor and sent on request.
- Panel and switchgear-yard materials — Cable, fuses, residual-current relays, panel materials; cross-section, amperage and IP rating go on the list.
- Site and emergency lighting — LED luminaires and emergency luminaires, with the lux value and IP rating from your specification.
- Control-room and building filters — Bag and cassette filters, grilles, fans; size and filter class can be read off the label of the current filter.
- Site PPE renewal — Hard hats, work gloves, goggles, ear protection, safety footwear; to the EN standard you specify, with size breakdown.
- Work-at-height equipment — Harnesses and connecting gear; the number of crew and the type of work go on the list.
- Hand tools and workshop equipment — Tool sets, cordless and electric tools, cutting and abrasive consumables; branded and economy options can be priced side by side.
- HSE signs and wayfinding — Warning, prohibition and emergency-exit signs; size or viewing distance, and quantity.
- Site entrance security — IP cameras, recorders and access control; given the camera count and retention period, storage and PoE budget are worked out in the quote.
- Admin building and shift-room replenishment — Cleaning chemicals, paper products, kitchenette consumables and stationery can ride on one request.
- Guest-house and staff-housing fit-out — Bedding, towels, cleaning and small fittings in the same request; bulky furniture may ship separately.
Send the list as Excel, PDF, a photo or plain text through the quote form. For a plant site, three details let us quote completely: the make and model of the equipment the item fits, the site address and the person who receives goods on site, and the date of the maintenance window. If a line is not covered here, write it anyway; it is added to the quote with its technical specification.
Six numbers that decide the specification
On energy sites the material decision is settled by the class and the inspection interval written into the specification, not by the brand. These six are technical conditions that can prove expensive later if a site purchase order leaves them out.
Numerical requirements on power and grid sites in Türkiye| Subject | Requirement | Basis |
|---|
| Arc-rated clothing class | The arc protection class is written into the specification as APC 1 or APC 2; the test current and arc duration of each class are in the standard itself | IEC 61482-1-2 (box test). This class is not the same as the cal/cm² ATPV value from IEC 61482-1-1 (open arc) — state which one you require |
|---|
| Chemical resistance of insulating gloves | Letter codes: A acid · H oil · Z ozone · R acid+oil+ozone · C very low temperature | IEC 60903 (special property categories). The voltage class alone is not enough; the letter has to be specified for the exposure on site |
|---|
| Inspection of electrical installations, earthing and lightning protection | Once a year where the standard sets no other interval | Regulation on Health and Safety Conditions in the Use of Work Equipment, Official Gazette 25.04.2013 / 28628, Annex III |
|---|
| Wind turbine lifting equipment (2025 amendment) | Brought under TS EN 81-44; under transitional art. 7 it has applied since 1 February 2026 | Regulation Amending the Work Equipment Regulation (İş Ekipmanları Yönetmeliğinde Değişiklik Yapılmasına Dair Yönetmelik), Official Gazette 23.12.2025 / 33116 |
|---|
| Cathodic protection interval (same amendment) | 6 months → 1 year | Same regulation. Site maintenance planning and the frequency of bought-in inspection services follow from this |
|---|
| Equipment inspection body requirement (same amendment) | Equipment that must be inspected by an equipment inspection body goes from 4 to 8 items; compliance date 1 January 2027 | Same regulation. The additions include disabled-access lifting platforms, steam boilers, cable transport installations and mast climbing work platforms — that list carries the 1 January 2027 date, not the TS EN 81-44 provision |
|---|
Turkish OHS material describing the position before the 23 December 2025 amendment is still online; check the date when you plan equipment inspection on a wind site. Inspections of Annex III equipment must be under a contract drawn up and approved in İSG-KATİP at least one day before (Art. 7(6), added by the amendment of 4 February 2024, Official Gazette 32450); a report issued without one is invalid (Art. 14/A(8), reworded on 23 December 2025).