HVAC, Air Conditioning & Filters
Filters, ductwork, grilles, fans and air-conditioning consumables — specified to ISO 16890, with change triggers and energy cost.
Request a Quote| Group | Typical items |
|---|---|
| Panel and bag filters | Coarse and ePM panel filters, bag filters in standard and non-standard sizes, metal and cardboard frames |
| Compact and HEPA | Rigid compact filters, HEPA and ULPA filters, gasket and clamp accessories, filter housings |
| Specialist filtration | Activated carbon filters, grease filters for kitchen extraction, pre-filter media rolls, pocket media |
| Air conditioning | Split and multi-split units, cassette and duct units, VRF accessories, portable units, remote controls |
| Ventilation | Axial and centrifugal fans, heat recovery units, duct and fittings, grilles and diffusers, flexible ducting |
| Refrigeration consumables | Refrigerant, brazing consumables, copper pipe and insulation, condensate pumps and hose, vacuum pump oil |
| Maintenance | Coil cleaners, condensate tablets, differential pressure gauges, filter change labels, manometers |
Not a catalogue — a scope indicator. If an item you need is not listed, it is very likely still within scope; send the description and we will price it.
Our item pool lists 30 items in this category, published together with every other category on the A to Z supply list — each with a short technical description and the unit it is ordered in. The same list is downloadable as a brand-free technical specification in Word and a unit-price schedule in Excel. That pool is a starting point rather than a boundary: items outside it are quoted the same way, from their measurable specification.
Buying from outside Türkiye? See heating, ventilation and air conditioning equipment from Türkiye: what we source, Türkiye’s export figures from UN Comtrade and the export terms.
Which filter class should be specified today?
ISO 16890 classes, not the old F and M ones. EN 779:2012 was withdrawn on 30 June 2018; since then ISO Coarse / ISO ePM10 / ISO ePM2,5 / ISO ePM1 are the only valid classification for general ventilation filters. Crucially, there is no one-to-one conversion — in Eurovent’s indicative data an F7 filter can measure as low as 40% ePM1, meaning it may not qualify for the ISO ePM1 group at all. Change triggers are widely misquoted too: a fixed pressure figure circulating online comes from laboratory loading tests, not an operational trigger; the operating rule is clean Δp plus a fixed increment, or a multiple of clean Δp, whichever is lower (the values are in EN 13053). On energy, at Eurovent reference conditions annual consumption is approximately 11.33 × average Δp in kWh.
Scope: We supply materials in this category. We do not provide filter changes, duct cleaning, installation and commissioning labour. Within İstanbul, filter changes and installation can be arranged on request and shown as a separate line in the quote. Beyond that — across all 81 provinces of Türkiye and on export shipments abroad — our commitment ends with delivery of the materials to the delivery point named on the quote, under the Incoterm agreed for export orders.
Summary
| Topic | Details |
|---|---|
| What we supply | Bag, panel and mini-pleat filters (ISO 16890); HEPA and activated carbon filters, pre-filter panels; AHU spares: belts, pulleys, bearings, damper actuators; Ductwork, flexible duct, connectors and gaskets; Grilles, diffusers, louvres and fresh air intakes; Axial and centrifugal fans, roof extractors, inline fans; Split, VRF and cassette air conditioners; heat pumps; Dehumidifiers, air curtains and electric heaters; Heat recovery units and exchangers; Thermostats, room controllers, sensors and controls; Copper tube, insulation, drain lines and installation consumables; Duct cleaning chemicals, disinfectants and service kits |
| Quote time | Standard items within 1 business day. Custom production, imports or 50+ line lists can take longer; we tell you the timeline in writing on the day we receive the request. |
| Lead time | Given per item as a written delivery term in the quote. |
| Minimum order | No fixed minimum. On a very low-value single-line order, freight can take a disproportionate share of the total; the quote says so. |
| Service area | All 81 provinces of Türkiye and shipments abroad; for deliveries abroad, the delivery term is set in the quote with Incoterms 2020. |
| Scope | We supply materials in this category. We do not provide filter changes, duct cleaning, installation and commissioning labour. |
| Pricing and payment | No published price list; every request is priced item by item, with VAT shown separately. For companies in Türkiye, payment can be in advance or on short or longer terms; the terms are stated in each quote. Orders shipped abroad are invoiced without Turkish VAT where the export exemption applies; the quote states it. New buyers abroad pay 100% before shipment by bank transfer from an account in the buyer company’s own name; prices are quoted in EUR, USD or TRY. Cash, crypto and third-party payments are not accepted. |
| Getting a quote | Request a quote: send your list as Excel, PDF, photo or plain text |
What we supply in this category
- Bag, panel and mini-pleat filters (ISO 16890)
- HEPA and activated carbon filters, pre-filter panels
- AHU spares: belts, pulleys, bearings, damper actuators
- Ductwork, flexible duct, connectors and gaskets
- Grilles, diffusers, louvres and fresh air intakes
- Axial and centrifugal fans, roof extractors, inline fans
- Split, VRF and cassette air conditioners; heat pumps
- Dehumidifiers, air curtains and electric heaters
- Heat recovery units and exchangers
- Thermostats, room controllers, sensors and controls
- Copper tube, insulation, drain lines and installation consumables
- Duct cleaning chemicals, disinfectants and service kits
- Refrigerant, gauges and service equipment
ISO 16890 groups
| Group | Which fraction’s efficiency is read | Reported value |
|---|---|---|
| ISO Coarse | None of the fine fractions meets a group requirement | Initial gravimetric arrestance |
| ISO ePM10 | Particles of 10 µm and below | ePM10 efficiency |
| ISO ePM2,5 | ePM2,5 (min): particles of 2.5 µm and below | ePM2,5 efficiency |
| ISO ePM1 | ePM1 (min): particles of 1 µm and below | ePM1 efficiency |
A filter is placed in the finest group whose minimum efficiency threshold in ISO 16890-1 its measured efficiency meets; if it misses the threshold it drops to the next group down. The threshold and the rule for rounding the reported value are in the standard itself and are not reproduced here. Specify the group and the efficiency you want, and read the value from the supplier’s ISO 16890 test report.
Old classes, indicative only
| EN 779:2012 | ePM1 | ePM2,5 | ePM10 |
|---|---|---|---|
| M5 | 5–35% | 10–45% | 40–70% |
| M6 | 10–40% | 20–50% | 60–80% |
| F7 | 40–65% | 65–75% | 80–90% |
| F8 | 65–90% | 75–95% | 90–100% |
| F9 | 80–90% | 85–95% | 90–100% |
Derived from test data on 91 real filters. Eurovent states plainly that the two systems cannot be compared or converted by any calculation method. Specify the ISO class you need and ask for the ISO 16890 test report.
Turkish legislation has its own comparison table: Table 7 of Part 5 (ventilation and air-conditioning) of the Communiqué on General Design Technical Specifications for Mechanical Installations (added by Official Gazette 5 August 2024, no. 32623 bis) sets EN 779 classes beside ISO 16890-1 efficiencies. Its ranges differ from Eurovent’s — for F7 it gives ePM1 50–75%, ePM2.5 above 70% and ePM10 above 80% (the heading of Table 4 in the same part writes F7 as ePM1 50–70%). Both are comparisons; the filter’s real class comes from its test report.
Frequently Asked Questions
Nearby categories: Carpet, Flooring & Acoustics · Office Plants & Planters. A single request can span several categories; they are priced in one quote and tracked on one account. The full list is on product categories, and Turkish procurement terms you will meet on the paperwork are explained in the glossary.
What replaces an F7 filter?
There is no direct equivalent. In Eurovent’s indicative data an F7 filter’s ePM1 efficiency ranges from 40% to 65%, so some F7 filters do not reach the ISO ePM1 group at all. Specify the class and efficiency you actually need — for example ISO ePM1 60% — and request the ISO 16890 test report.
At what pressure drop should filters be changed?
Under EN 13053 and Eurovent 6/18 the operating rule is clean pressure drop plus a fixed increment, or a multiple of the clean pressure drop, whichever is lower (the increment is smaller for coarse filters; the values are in the standard). The fixed pressure figure quoted online (450 Pa is the best known) is carried over from laboratory loading tests, not an operating rule, and running to it multiplies fan energy.
How is a replacement filter identified?
From the frame dimensions (width × height × depth in millimetres), the efficiency class and the frame type. Photograph the label on the existing filter; if the label is unreadable, measure the frame and note the frame type, and take the efficiency class from the unit’s documentation or specification. Older units may use non-standard sizes; these are made to order and take longer, so measure before the filter is due rather than after.
How often should filters be changed?
By differential pressure where it is measured, and by a calendar interval where it is not. Application guides for EN 13779 (withdrawn 2017, replaced by EN 16798-3) use about 2,000 operating hours or at most one year for the first filter stage and 4,000 hours or at most two years for later stages — whichever comes first, or earlier if the final pressure drop is reached; dusty or high-pollen sites reach it sooner. A clogged filter raises fan energy consumption continuously, so the change interval is an energy decision as much as an air quality one.
Which HVAC filters and air conditioning supplies can you source?
Coarse and ePM panel filters, bag filters in standard and non-standard sizes, rigid compact, HEPA and ULPA filters, activated carbon and kitchen grease filters and pre-filter media rolls; alongside them split, cassette and duct air conditioning units, fans and heat recovery units, ductwork, grilles and diffusers, refrigerant and maintenance consumables. For filters, send the frame dimensions, the filter class and the quantity, or a photo of the label on the current filter.
Do you service air conditioning units?
We supply the units, filters, refrigerant and consumables. Installation, commissioning and periodic maintenance are outside our scope; within İstanbul, installation can be arranged on request as a separate line in the quote.
Do you ship outside Türkiye?
Yes. We deliver across all 81 provinces of Türkiye and arrange export shipments abroad. On export orders the delivery term is agreed at quotation stage under Incoterms 2020 — EXW, FCA, CPT or DAP — and the quote states which party arranges and pays for carriage, and where our responsibility ends. Country of origin, HS code and any conformity documents needed for export are settled at the same stage.
What does an export quote include, and what does it not?
It includes the goods, export packing where required, and carriage up to the point defined by the agreed Incoterm. It does not include destination-country duties, taxes or customs charges — those sit with the buyer. Cargo insurance is not automatic under EXW, FCA, CPT or DAP; if you want it arranged, say so in the request and it appears as a separate line. Goods exported to a customer abroad are invoiced without Turkish VAT under the export exemption (VAT Law art. 11/1-a); art. 12 requires the goods to leave Turkish customs territory and reach a foreign country or a free zone, and the quote states the VAT treatment.
Is there a minimum order for an export shipment?
There is no fixed minimum, but freight economics set a practical floor: on a low-value single-line order, carriage can exceed the value of the goods. Ordering several categories together can be what makes an export order worth placing — which is the same reason our buyers consolidate domestically. Tell us the delivery country and we will say honestly whether the freight makes sense before you spend time on a specification.
These three questions are the same on every category and industry page. The full answer — Incoterms, the document set and ISPM 15 packing — is in our export shipping guide.
Sources
- ISO 16890-1:2016 — classification of air filters for general ventilation
- Eurovent 4/23 (2022) — selection of EN ISO 16890 rated air filter classes
How we choose sources, verify figures and date our pages is set out in how we source and verify what we publish. Spotted an error? Write to info@aksco.com.tr — verified errors are corrected.
Related guides
Corporate Purchasing in Türkiye: A Practical Guide
Payment terms, VAT, invoicing and multi-site delivery explained for buyers new to the market.
Read moreSingle-Supplier Consolidation: 8 Advantages
What consolidating dozens of suppliers into one actually saves.
Read moreRequest a Quote
Send a list in any format — Excel, PDF or a photo — and get it priced line by line.
Read moreSend your list — your quote is ready within 1 business day.
A list, a photo or an Excel file — whatever is easiest. On standard items we aim to quote the same business day. Custom production, imports or 50+ line lists can take longer; when they do, we tell you the timeline in writing on the day we receive the request.