Standard Carton Sizes, Volumetric Weight and Pallet Fit
A carton sizes table with flute types and volumetric weight (desi): from carton dimensions to the weight you are charged for, a multi-carton calculator and how many cartons fit a Euro pallet.
What is desi, and how is volumetric weight calculated?
Desi is the Turkish name for volumetric weight: the volume of a parcel expressed as a weight. A light but bulky shipment takes up as much space in the vehicle as a heavy one, so carriers do not charge on kilos alone. The calculation is width × length × height (cm) ÷ divisor. Domestic carriers in Türkiye can use 3000 (Yurtiçi Kargo divides the volume in dm³ by 3, and Aras Kargo divides by 3,000 for domestic shipments); the UPS Türkiye tariff uses 5000 and the IATA general rule for air freight is 6000; for DHL, FedEx and other express couriers, confirm the divisor in the carrier’s tariff — the one in your contract is the one that applies. You are charged on whichever is greater, the volumetric weight or the actual weight. A 40 × 30 × 30 cm carton is 12 desi on a divisor of 3000; with 5 kg of goods inside, it is charged as 12.
Which divisor applies?
The divisor is not a fixed number; it is set in the carrier’s contract. The same carton gives a different volumetric weight on each divisor, and the invoice moves with it.
| Divisor | Volumetric weight | Where you meet it |
|---|---|---|
| 3000 | 12.0 | Domestic carriers in Türkiye (e.g. Yurtiçi Kargo) |
| 5000 | 7.2 | UPS Türkiye tariff (for other couriers, confirm the divisor in the tariff) |
| 6000 | 6.0 | IATA general rule for air freight (1 kg = 6,000 cm³) |
Confirm the divisor before you sign a contract; for light, bulky goods it decides the invoice more than the price per kilo does. Different divisor values circulate online — the only one that binds you is the one written in your own contract of carriage.
If your goods are light and bulky (textiles, packaging, plastics), it is the volumetric weight, not the kilos, that sets your freight bill. Taking 2 cm off a carton can save more than negotiating the rate.
For a single carton — its volumetric weight on 3000, 5000 or 6000, the chargeable weight after rounding and how many cartons fit a pallet — use the volumetric weight calculator. For a shipment of several carton sizes, use the calculator in the next section.
Total volumetric weight of a multi-carton shipment
When a shipment contains cartons of different sizes, the calculation is done line by line. For each line, volumetric weight = width × length × height (cm) ÷ divisor; the greater of the volumetric and actual weight per carton is taken and multiplied by the number of cartons. Yurtiçi Kargo, for example, states that for a shipment of several pieces this is done for each piece separately and the sum of the chargeable weights is used.
Whether your carrier charges carton by carton or on the consignment total is in its tariff or your contract; the calculator below shows both. The carton-by-carton total is never lower than the consignment-total figure: each carton is counted at its own greater value, so a small heavy carton and a light bulky one cannot offset each other.
Enter your carrier’s divisor in the divisor field. The default is only an example, and while the field holds it, every result that depends on the divisor is labelled “(example value)”. Results are unrounded — rounding rules differ by carrier, so apply the rule in your tariff separately.
Multi-carton volumetric weight calculator
From carton lines to total volumetric weight, total actual weight and chargeable weight — carton by carton and on the consignment total.
Result
The calculation runs entirely in your browser; nothing you type is sent to our servers or stored.
Example: a 3-line consignment
| Line | Size (width × length × height, cm) | Actual weight / carton | Cartons |
|---|---|---|---|
| 1 | 40 × 30 × 30 | 5 kg | 10 |
| 2 | 60 × 40 × 40 | 8 kg | 4 |
| 3 | 30 × 20 × 20 | 6 kg | 2 |
| Result | Value |
|---|---|
| Total cartons | 16 cartons |
| Total volumetric weight | 256 volumetric kg (example value) |
| Total actual weight | 94 kg |
| Chargeable — carton by carton | 260 kg (example value) |
| Chargeable — on the consignment total | 256 kg (example value) — volume governs |
This table is the calculator’s own output on its default values; it was not typed in by hand. The divisor is only an example — enter your carrier’s divisor and the result changes.
In this 3-line example the carton-by-carton total is 260 kg (example value) and the consignment-total method gives 256 kg (example value). The gap comes from line 3: the 30 × 20 × 20 cm carton weighs 6 kg, more than its volumetric weight. Counted carton by carton, that extra weight is charged on its own; on the consignment total it disappears inside the volume of the other cartons.
To do the same in a spreadsheet, five columns per line are enough: width, length, height, actual weight per carton and number of cartons — the formulas are in the questions below. If you need cartons in these sizes, send the size (stating whether it is inside or outside), the flute and the quantity through the packaging and shipping supplies page.
Flute types: what sets the strength of a carton
In corrugated board, strength depends less on thickness than on the flute type and the number of plies. The flute is named by a letter that stands for its height.
| Flute | Approximate height | Ply | Typical use |
|---|---|---|---|
| E | 1.0–1.8 mm | 3 | Thin, high print quality; e-commerce and presentation boxes |
| B | 2.2–3.0 mm | 3 | Light loads, inner packaging, dividers and fillers |
| C | 3.5–4.0 mm | 3 | General-purpose single-wall carton |
| A | 4.5–5.0 mm | 3 | Light, bulky goods that need cushioning |
| EB | 4.0–4.5 mm | 5 | Print quality + medium strength |
| EC | 5.0–5.5 mm | 5 | Print quality + high strength |
| BC | 6.0–7.5 mm | 5 | Heavy loads, long distances, stacking |
Flute heights vary with the manufacturer and the paper grammage, and the ranges in the table are approximate — which is why a specification states measurable strength rather than a letter: bursting strength (ISO 2759, TS EN ISO 2759 in Türkiye, kPa — the Turkish market also quotes it in kgf/cm²; 1 kgf/cm² ≈ 98 kPa) or edge crush resistance, ECT (ISO 3037, TS EN ISO 3037, kN/m). The letter alone does not guarantee strength.
Standard carton sizes
There is no single list of “standard cartons” in Türkiye; each manufacturer’s stock sizes differ a little. Moving away from a manufacturer’s stock size can raise the unit price because of tooling and cutting, so the sizes below are an example set for planning.
| Size (width × length × height, cm) | Volume | Desi on a divisor of 3000 | Typical use |
|---|---|---|---|
| 20 × 15 × 10 | 3 dm³ | 1.0 | Small parts, accessories |
| 25 × 20 × 15 | 7.5 dm³ | 2.5 | Single e-commerce item |
| 30 × 20 × 20 | 12 dm³ | 4.0 | Medium single item |
| 35 × 25 × 25 | 21.9 dm³ | 7.3 | Mixed order |
| 40 × 30 × 30 | 36 dm³ | 12.0 | General purpose |
| 50 × 40 × 30 | 60 dm³ | 20.0 | Bulk shipments |
| 60 × 40 × 40 | 96 dm³ | 32.0 | Light, bulky goods |
| 60 × 40 × 20 | 48 dm³ | 16.0 | Fits the pallet module (120 × 80) |
| 40 × 30 × 20 | 24 dm³ | 8.0 | Fits the pallet module (120 × 80) |
The last two rows matter most: 60 × 40 and 40 × 30 footprints sit on a Euro pallet (120 × 80 cm) base with no waste. Choosing the size with the pallet in mind can save more than looking at the carton price on its own.
How many cartons fit on a pallet?
Pallet fill is an easily overlooked line in packaging cost. The gap between a pattern that covers 85% of the base and one that covers 65% is paid for in freight on every pallet you ship.
The volumetric weight calculator tries the carton both ways round (as placed and turned) and takes the better one, and it shows the base fill as a percentage. If the fill drops below 80%, consider bringing the carton size closer to the pallet module (60 × 40, 40 × 30, 30 × 20).
| Carton footprint | Per layer | Base fill | With a mixed pattern |
|---|---|---|---|
| 60 × 40 cm | 4 | 100% | — |
| 40 × 30 cm | 8 | 100% | — |
| 30 × 20 cm | 16 | 100% | — |
| 35 × 25 cm | 9 | 82% | 10 (91%) |
| 45 × 35 cm | 4 | 66% | 5 (82%) |
The table shows the plain grid pattern in which every carton faces the same way — the same result the calculator gives. For the last two rows, turning blocks of cartons through 90° (a mixed or pinwheel pattern) fits one more per layer: 10 for 35 × 25 (91%) and 5 for 45 × 35 (82%). A mixed pattern can weaken the stack, so it is not recommended for heavy cartons, and it is harder to build by hand; these figures are also base layer fill and assume no carton overhangs the pallet. Even so, the table makes the point: the two off-module sizes here lose 9–18% of the base in the best pattern, and 18–34% in a grid.
Five decisions that cut packaging cost
- Choose the carton size to the pallet module. Cartons with a 60 × 40 or 40 × 30 footprint sit on a Euro pallet with no waste.
- Measure the space between the goods and the carton. An extra 3 cm of space in each dimension takes a 40 × 30 × 30 carton (12 desi) to 43 × 33 × 33 — 15.6 desi (16 with a carrier that rounds 0.50 and above up), roughly 30–33% more volumetric weight; how much of it reaches the invoice depends on the weight bands in the tariff.
- Match the flute to the load. Putting a light product in a BC carton is unnecessary cost; putting a heavy one in a C carton invites damage.
- Confirm the divisor in the contract. For bulky goods the divisor decides more than the unit rate.
- Measure stretch film use separately. The cost of securing the pallet is easy to leave out; the stretch film calculator gives the real figure per pallet.
Sourcing cartons and packaging supplies
AKSCO supplies businesses with packaging materials such as single- and double-wall cartons, stretch film, packing tape, strapping and pallets. A list that gives each size (stating whether it is inside or outside), the flute, a strength value (bursting or ECT) and the quantity is priced in a single quote; the range is on the packaging and shipping supplies page.
Frequently Asked Questions
Is the divisor 3000, 5000 or 6000?
All three are in use, and which one applies is written in your contract of carriage. Domestic carriers in Türkiye can use 3000 (Yurtiçi Kargo divides the volume in dm³ by 3, and Aras Kargo divides by 3,000 for domestic shipments); the UPS Türkiye tariff uses 5000, and the IATA general rule for air freight is 6000. For DHL, FedEx and other express couriers, confirm the divisor in the carrier’s tariff. The larger the divisor, the lower the volumetric weight of the same carton — so a larger divisor works in your favour. When comparing offers, ask for the divisor as well as the rate.
Is a shipment charged on desi or on kilos — and how is it rounded?
How is volumetric weight calculated for several cartons?
Each carton line is calculated on its own: width × length × height (cm) ÷ divisor, the greater of the volumetric and actual weight per carton is taken and multiplied by the number of cartons, and the line totals give the chargeable weight carton by carton. If your tariff charges on the greater of the consignment’s total volumetric weight and total actual weight instead, the result can be lower; check which method your tariff uses. The carton-by-carton total is never lower than the consignment-total figure.
How do I calculate desi in Excel?
Put width, length, height (cm), actual weight per carton (kg) and the number of cartons in columns A–E, and the divisor in a separate cell (for example J1). For row 2, enter the volumetric weight per carton in F2 as “=A2*B2*C2/$J$1” and the chargeable line total in G2 as “=MAX(F2,D2)*E2”, then fill down. The carton-by-carton total is “=SUM(G2:G50)”; the consignment-total figure is “=MAX(SUMPRODUCT(F2:F50,E2:E50),SUMPRODUCT(D2:D50,E2:E50))”. In Turkish Excel the functions are “MAK”, “TOPLA” and “TOPLA.ÇARPIM”; the argument separator is a comma or a semicolon depending on your regional settings. Add rounding according to your carrier’s rule if you need it.
Should carton sizes be given as inside or outside dimensions?
How do I specify carton strength?
Together with the flute type and the number of plies, ask for bursting strength (ISO 2759, kPa) or edge crush resistance, ECT (ISO 3037, kN/m). For a general-purpose single-wall C-flute carton, the minimum values we suggest are bursting strength ≥ 1,000 kPa (≈ 10 kgf/cm²) or ECT ≥ 4.5 kN/m. The two tests measure different properties and cannot be converted into each other; we chose the pair to sit close to the 150 lb/in² bursting (≈ 1,034 kPa) and 26 lb/in ECT (≈ 4.55 kN/m) alternatives that the US rail freight rules (UFC 6000-M Supplement 8, 2013 edition, Rule 41) place in the same single-wall class. In that table the class covers cartons of up to ≈ 16 kg (35 lb) gross and a combined width + length + height of up to ≈ 127 cm (50 in); for heavier or larger cartons move up a class — ≈ 1,207 kPa or ≈ 5.1 kN/m (≈ 23 kg, ≈ 152 cm), then ≈ 1,379 kPa or ≈ 5.6 kN/m (≈ 29 kg, ≈ 190 cm). If stacking is what matters, specify ECT rather than bursting strength — ECT is the one related to stacking strength. For cartons that will be stacked, state the stack height as well, since the strength requirement follows from it.
Why does pallet fill matter?
Because freight can be charged per pallet, not per carton. With a pattern that covers 65% of the base, roughly a third of every pallet you ship is empty space. Bringing the carton size closer to the pallet module can make a bigger difference to the annual freight bill than negotiating the rate.
Sources
- Yurtiçi Kargo — how the price is calculated (desi = dm³ ÷ 3, each piece separately, rounding of fractions)
- DHL Express Bulgaria rate guide 2026 (Express Worldwide) — 0.5 kg steps up to 30 kg, 1 kg above
- Aras Kargo — operational transportation standards (domestic: volume ÷ 3,000)
- UPS Türkiye — 2025 Tariff Guide (volumetric weight: divide by 5,000; packages rounded to the half kg, pallets to the whole kg; effective 22 December 2024)
- IATA — Air Cargo Tariffs and Rules (air freight general rule: volume ÷ 6,000)
- Railinc — UFC 6000-M Supplement 8 (2013), Rule 41: corrugated box class table (bursting ↔ ECT, weight and size limits)
- Fibre Box Association — NMFC 2025 Items 222-1 to 222-6, reproduced with NMFTA permission (bursting ↔ ECT pairs 125/175/200/275 only; no weight or size rows)
How we choose sources, verify figures and date our pages is set out in how we source and verify what we publish. Spotted an error? Write to info@aksco.com.tr — verified errors are corrected.
Related guides
Volumetric Weight and Pallet Fit Calculator
One carton: volumetric weight on 3000, 5000 or 6000, chargeable weight and cartons per pallet.
Read moreStretch Film Consumption and Cost Calculator
Real film use and cost per pallet.
Read morePallet and Container Loading Calculator
How many pallets fit a container — volume and payload together.
Read morePackaging & Shipping Supplies
Cartons, film, tape, strapping and pallets in one quote.
Read moreSend your list — your quote is ready within 1 business day.
A list, a photo or an Excel file — whatever is easiest. On standard items we aim to quote the same business day. Custom production, imports or 50+ line lists can take longer; when they do, we tell you the timeline in writing on the day we receive the request.